Publicidad
Idiomas disponibles
Idiomas disponibles
Radio hand transmitter RMC
The radio hand transmitter consists of the following com-
ponents:
•
Button 1: Operating button (A) for luminaire group 1 (channel
1 of
the first master luminaire)
•
Button 2: Operating button (B) for luminaire group 2 (channel
2 of
the first master luminaire)
•
Button 3: Operating button (C) for luminaire group 3 (channel
1 of
the second master luminaire)
•
Button 4: Operating button (D) for luminaire group 4 (channel
2 of
the second master luminaire)
A
B
The radio hand transmitter enables operation of two master
luminaires (‚...+EOM') with integrated radio receiver. Each ma-
ster luminaire has two channels (Ch 1 and Ch 2) for connection
of independent luminaire groups that can be operated indepen-
dently of each other via the radio hand transmitter..
First master luminaire :
•
Luminaire group on channel 1: button 1
•
Luminaire group on channel 2: button 2
Second master luminaire:
•
Luminaire group on channel 1: button 3
•
Luminaire group on channel 2: button 4
Teaching in of the radio hand transmitters in the radio receiver
is necessary.
14
C
D
Switching the luminaire on/off
Briefly pressing one of the channel buttons of the hand trans-
mitter switches the luminaire group connected to the corre-
sponding channel either on or off.
Modifying the brightness
Pressing and holding one of the hand transmitter channel
buttons modifies brightness of the luminaire group connected
to this channel.
Each renewed pressing and holding alternately increases and
reduces brightness.
15
Publicidad
Capítulos
