dirna Bergstrom bycool DINAMIC 1.1 Manual Del Usuario página 6

DINAMIC
EN
Led indicating
COMPRESSOR
functionning
Switched on - Connected
Swiched off - Disconnected
Conexión y desconexión
manual del Compresor
The equipment has two functionning modes:
F4 Automatic mode.
F0 Manual mode.
Other functions:
F1 Digital thermometer.
F2 Time programming.
ºF Selection
F6
(Farenheit).
When starting, equipment will automatically be in Mode F4 (automatic). Manteniendo
If ON/OFF key is maintained pressed, functions will change as they appear on display
F4,F0,F1,F2,F3. Release on desired option.
ca will appear on display. alternatively whith the selected temperature. If temperature is
above 32º inside vehicle, when equipment is switched on, blower and compressor go into
maximum power for about 20 minutes, then blower and compressor regulate their capacity
depending on inside temperature.
-
+ By pushing , one key or the other, desired temperature is chosen, between 15º and
27º C - 59-80º F.
DISPLAY
+
TEMP
!
F4 Automatic functioning
TEMPERATURE SELECTOR
-
ºC
Flashing - Compressor connected
ºF
SWITCHED ON - SWITCHED OFF
NOTE:
If, during assembly, the unit becomes
slanted or the cabin drops with the unit
mounted, wait for at least 60 minutes from
the moment the unit is horizontal before
starting up.
6
between 15º and 27º
BLOWER SPEEDS
from U1 to U5
Led indicating
EQUIPEMENT
functionning
Fixed - Compressor stopped
®