14 www.electrolux.com
RESET BUTTON
Once the recessed RESET button is
pressed, all of the current settings will be
cancelled and the controller will return to
the initial settings.
ON/OFF BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
FAN SPEED BUTTON
Used to select the fan speed in four steps.
AUTO
TIMER ON BUTTON
Press this button to activate the Auto-on
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-on time
setting, just press the button until the time
setting is 0.0.
ECONOMY/SLEEP BUTTON
Press this button to activate the Energy-
Saving mode. Press again to stop
the function. This function is available
on COOL, HEAT or AUTO mode only
and maintain the most comfortable
temperature for you.
LOW
MED
HIGH
TIMER OFF BUTTON
Press this button to activate the Auto-off
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-off time
setting, just press the button until the time
setting is 0.0.
LOCK BUTTON
When you press the Lock button,all
current settings are locked in and the
remote controller does not accept any
operation except that of the Lock. Press
again to cancel the Lock mode.
TURBO BUTTON
Push this button to activate the Turbo
function which enables the unit to reach
the preset temperature at cooling or
heating operation in the shortest time (if
the unit has no this function, there is no
corresponding operation happened when
press Turbo button.)
LED DISPLAY BUTTON
Press this button to clear the display on
the unit, press it again to light the display.