Cleaning; Storing And Caring For The Product; Disposal - Imetec G0801 Instrucciones De Uso

• Dry the hair and brush from the roots to the ends.
• Divide hair into sections and start straightening from the nape of the neck.
ADJUSTING THE TEMPERATURE
The styler is equipped with a selector for adjusting the temperature (4) that allows setting
appliance temperature based on the type of hair and the desired hairstyle.
Start styling by setting it at a lower temperature and progressively increasing the temperature.
Scroll the selector switch (4) choosing from among one of the following temperatures:
170°C: recommended for thinly structured hair and for styling soft curls.
190°C: recommended for medium structured hair and for styling medium definition curls.
210°C: recommended for thick structured hair and for styling more defined curls.
USER INSTRUCTIONS
• Connect the power cord (7) to the mains and position the styler on a smooth and heat
resistant surface. Slide the On/Off selector switch (5) to the ON position to switch on the
appliance.
• Select the desired temperature using the temperature selector (4); the temperature can be
changed at any time simply by scrolling the selector (4).
• Take a lock of hair, which is not too wide or voluminous between the finger (about 2 cm); more
defined curls are obtained with smaller locks of hair.
• Keeping the hair lock tightly, bring the cold tip (1) of the heated parts just above the place
where the hands are holding it and proceed by inserting the lock of hair into the heated part
slot (2) making sure that it almost reaches the bottom of the slot; next move up along the hair
lock and come in proximity of the roots and maintain the styler position.
• Slightly tilt the product compared to the hair lock, rotate the instrument 360° in one or the
other direction depending on the direction of the effect to be created. Do not roll the hair lock
any more, but allow the product to slowly slide downwards, maintaining its inclination so that
the hair lock does no overlap on itself during the movement.
• If desiring a more sustained curl, proceed very slowly and add additional rotations that will
help the hair lock adhere better to the heated parts (2).
In order to discover the numerous methods and effects that can be achieved using the
styler, consult the Styling Guide.
• Once styling operations have terminated, shut off the appliance by sliding the On/Off selector
switch (5) to the OFF position, disconnect the power cord from the socket (7) and let the
instrument cool down completely before putting it away.
NOTE: It is possible that steam develops during straightening; this is excess
humidity in the hair that evaporates. Make sure that the tip of the hair lock is always
positioned in the lower area of the barrel in order to improve smoothness and lock
release.
• Disconnect the appliance from the mains (7).
• Verify that the hair styler is cold.
• Clean the external and internal surfaces of the heated parts (2) and the handle of the styler
using a soft and damp cloth. In order to clean the internal surface, delicately insert a cloth in
the slot of the cylinder and allow it to slide along the entire surface.
• Let it dry completely before starting it up again.
IMPORTANT ! Make sure all cleaned parts are completely dry before reusing
the appliance.

STORING AND CARING FOR THE PRODUCT

ATTENTION! Once you have finished using the hair straightener, make sure it
has cooled down completely before putting it away. Never wrap the power
supply cord (7) around the appliance.
The product is packaged in recyclable materials.
Dispose of these in an appropriate environmentally friendly manner.
Pursuant to European Standard 2002/96/EC, the appliance must be disposed of at the

CLEANING

DISPOSAL

7