Descargar Imprimir esta página

Cleaning; Storing And Caring For The Product; Disposal; Assistance And Warranty - Imetec M5001 Instrucciones Para El Uso

Ocultar thumbs Ver también para M5001:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
selection operations described.
If you wish to select the manual mode press BACK
in the INSTRUCTIONS FOR USE paragraph; manual mode.
Switching off the product
Press
(6) for at least two seconds to switch the product off.
Disconnect the straightener from the socket.
NOTE: If the straightener is switched off but is not disconnected from the socket,
the background colour of the display remains on until a temperature of about 70°C has
been reached; this indicates that the straightener is still hot.
Plate closing system
The straightener has a closing system
To fasten the two arms in the closed position, hold them together and press the plates
lock (7)
To unlock, press the plates lock on the opposite side
NOTE: steam may appear while straightening; this is excess humidity in the hair
evaporating.
NOTE: If the background colour of the display flashes red or magenta the straightener
has a fault. Contact an assistance centre.
ATTENTION! Risk of scalding
AUTOMATIC SWITCH-OFF
The straightener switches off automatically 1 hour after being switched on.
Switch off the appliance by pressing
from the socket
Wait for the plates (2) to cool down
Clean the surface of the plates (2) and the handle with a soft, damp cloth.
ATTENTION! Make sure all cleaned parts are completely dry before reusing
the appliance.

STORING AND CARING FOR THE PRODUCT

WARNING: Once you have finished using the hair straightener, make sure it
has cooled down completely before putting it away. Never wrap the power
cable (8) around the appliance.
The product is packaged in recyclable materials. Dispose of packaging in accordance with the
environmental protection standards. Pursuant to Art. 26 of Italian Legislative Decree no. 49 of
14 March 2014 "Implementation of Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE)", the crossed bin symbol on the appliance or its packaging indicates that
the product must be disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical and
electronic equipment.
Alternatively, instead of handling the disposal, the appliance can be handed over to the retailer when
a new, equivalent appliance is purchased. Retailers of electronic products having a sales area of
at least 400 m2 can also be handed electronic products that are to be disposed of measuring less
than 25 cm, free of charge and with no obligation to buy. Appropriate separate collection for the
subsequent procedure for the decommissioned appliance for recycling, which includes treatment
and environmentally friendly disposal helps prevent adverse effects on the environment and health
and promotes reusing and/or recycling materials that the appliance consists of.
The appliance is guaranteed for a period of 2 years from the date of purchase. Evidence shall be
constituted by the date indicated on the receipt/invoice (provided it is legible), unless the buyer
can prove that the delivery occurred later. In the case of a defective product existing prior to the
date of delivery, IMETEC guarantees to repair or replace the appliance at no cost, unless one
of the two solutions is disproportionate to the other. The buyer has the obligation to notify an
IMETEC Service Centre of the non-conformity within two months after discovering the defect.
The warranty does not cover any part that may be defective due to:

CLEANING

(6) for at least two seconds and disconnect the plug (8)

DISPOSAL

ASSISTANCE AND WARRANTY

(4) twice and follow the indications
10

Publicidad

loading