Breville the Smart Oven Pro Manual De Instrucciones página 24

Before cleaning, ensure the oven is turned off
by pressing the START/CANCEL button on
the control panel. The oven is off when the
button backlight is no longer illuminated.
Remove the power plug from the power outlet.
Allow the oven and all accessories to cool
completely before disassembling and cleaning.
Cleaning the outer body and door
1. Wipe the outer body with a soft, damp
sponge. A non-abrasive liquid cleanser or
mild spray solution may be used to avoid
build-up of stains. Apply the cleanser
to the sponge, not the oven surface,
before cleaning.
2. To clean the glass door, use a glass cleaner
or mild detergent and a soft, damp sponge
or soft plastic scouring pad. Do not use an
abrasive cleanser or metal scouring pad as
these will scratch the oven surface.
3. Wipe the LCD screen with a soft damp
cloth. Apply cleanser to the cloth and not
the LCD surface. Cleaning with dry cloth or
abrasive cleaners may scratch the surface.
4. Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet
and turning the oven on.
WARNING
Do not immerse the body, power cord or power
plug in water or any other liquid as this may
cause electrocution.
24
Cleaning the interior
The walls on the inside of the oven feature a
non-stick coating for easy cleaning. To clean
any spattering that may occur while cooking,
wipe the walls with a soft, damp sponge. A non-
abrasive liquid cleanser or mild spray solution
may be used to avoid build-up of stains. Apply
the cleanser to the sponge, not the oven
surface, before cleaning. Avoid touching the
quartz heating elements.
WARNING
Use extreme caution when cleaning the
quartz heating elements. Allow the oven to
cool completely, then gently rub a soft, damp
sponge or cloth along the length of the heating
element.
Do not use any type of cleanser or cleaning
agents. Do not use any standard oven cleaner
to clean the interior of the oven as this will
deteriorate the metal surface.
Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet
and turning the oven ON.
Cleaning the crumb tray
1. After each use, slide out the crumb tray
and discard crumbs. Wipe the tray with a
soft, damp sponge. A non-abrasive liquid
cleanser may be used to avoid build-up of
stains. Apply the cleanser to the sponge, not
the tray, before cleaning. Dry thoroughly.
2. To remove baked-on grease, soak the tray
in warm soapy water then wash with a soft
sponge or soft plastic scouring pad. Rinse
and dry thoroughly.
3. Always ensure to re-insert the crumb tray
into the oven after cleaning and prior to
inserting the power plug into a power outlet
and turning the oven on.