Microsoft XBOX 360 Manual De Usuario página 6

To connect to your high definition TV:
Connect the HD AV Cable connector to the
1
AV port on the console.
Set the switch on the AV port connector to
2
TV or HDTV. The HDTV position should be
selected if your TV supports high definition
resolutions such as 480p, 720p, 1080i, or
1080p.
Connect the red, green, and blue color-
3
banded video connectors on the HD AV
cable to the corresponding color inputs (Y,
Cb/Pb, Cr/Pr) on your TV. Leave the yellow
color-banded composite video connector
unconnected.
Connect the solid color left and right (white
4
and red) audio connectors on the HD AV
cable to the audio inputs on your TV or
stereo receiver.

Select the appropriate video input on your
5
TV (see "No Picture" under
"Troubleshooting" for further information).
After you've set up your console, you can
configure additional console audio settings
and test your connection from the System
area of the Xbox Dashboard. But before doing
so, proceed through the steps in the following
pages for connecting to power, connecting
your controller, and other initial settings.
OtherAVinput
You can also connect to additional TV input
types by using the Xbox 360 S-Video AV Cable,
the Xbox 360 VGA HD AV Cable, or the Xbox
360 HDMI AV Cable (all sold separately). For
more information, go to www.xbox.com/setup.
5