English; Safety Indications - GIESSE SLIM-LOCK Manual De Uso E Instalación

1. SAFETY INDICATIONS

ATTENTION B
BEEN READ CAREFULLY AND UNDERSTOOD IN ORDER TO PREVENT CONTACT WITH ELECTRICITY
INJURY OR ANY OTHER INCIDENT
CONSULTATION AT A LATER DATE
The SLIM-LOCK electromechanical lock has been designed exclusively for equipping window and door
locking devices, even in smoke and heat extraction systems.
Any use for applications other than those indicated must previously be authorized by the
manufacturer upon technical verification of the application.
The following indications should be observed carefully.
The appliance must be installed by competent and qualified technical personnel.
After removing packaging, check for any damage on the appliance.
Plastic bags, polystyrene, small metal parts such as nails, staples etc should be placed out of the
reach of children as they constitute a potential source of risk.
Keep children, disabled individuals and animals away from the window and its controls.
Before connecting the appliance, check that the power supply has the same specifications as those
indicated on the technical data label on the appliance.
This machine is destined exclusively for the use for which it has been designed and the
manufacturer accepts no responsibility for damage incurred by improper use.
The lock is destined exclusively for installation indoors. For any special application we recommend
you consult the manufacturer beforehand.
The actuator must be installed in accordance with the manufacturer's instructions. Failure to
respect these instructions could compromise safety.
Power supply installation must comply with any regulations in force.
Do not use solvents or jets of water to wash the appliance. The appliance should not be submerged
in water.
Repairs should only be performed by qualified personnel at assistance centres authorised by the
manufacturer.
Always request exclusive use of original spare parts. Failure to respect this condition could
compromise safety and invalidate the benefits contained in the warranty for the appliance.
In the event of any problems or queries, consult your agent or contact the manufacturer directly.
Ensure that the stroke-end selection allows the hook to exit at least 3÷5 mm from pawl, granting
the window opening.
Verify that in feeding cable path, inside frame profile, there are no sharp edges likely to cause current
disruption or short circuit.
In the event of breakage or malfunction, switch the appliance off at the general switch and call for
the services of a qualified technician.
EFORE INSTALLING THIS APPLIANCE
.
THE MANUAL SHOULD BE CONSERVED FOR FURTHER
.
ATTENTION
,
ENSURE ALL SAFETY INDICATIONS HAVE
20

English

,