Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
General dimensions of the electromechanical lock
Always mount the latching plate under the hook.
The device is packaged in a cardboard box that contains:
• One electromechanical lock, having a stroke of 18 and 36 mm, with a 2 m cable.
• Package of small metal parts.
• Instructions manual.
5. ID PLATE AND MARKING DATA
All devices have
requirements. The
the product indicate 'presumed conformity to the directives' issued by the European Community.
The manufacturer holds the technical archive with documentation providing that products have
been examined and evaluated for conformity to directives. ID plate data are indicated on a
polyethylene adhesive label applied externally on the outside of the container, printed in black
on a grey background. Values conform to EC requirements in force. See figure for example of
labelling.
←
The label is attached to the actuator; when mounted, the label is not visible.
Note!
6. ELECTRIC POWER SUPPLY
Risk of electric shock.
-
-
-
Stroke adjusting
dip-switch stopper
marking and are destined for use in the European Union without further
marking on the product, packaging and indications for use provided with
Comply with the CE standards for electrical installation.
The electrical connection must comply with current standards on the design and
implementation of electrical systems.
Disconnect the electric power supply before carrying out any electrical connection
work.
CLOSE
22
Stroke 18/36
Publicidad
Tabla de contenido
