Ega Master 79907 Manual De Instrucciones página 22

Check damaged parts.
Before using the machine, damaged parts or protective devices should be carefully checked to make sure
they work soundly and fulfil the designated function. Check alignment, connections and attachment of moving
parts. Also check if parts are broken. Parts or protective devices that are damaged should, if nothing else is
mentioned in these operating instructions, only be exchanged or repaired by qualified personnel. The same
applies to defective switches and valve triggers. If the machine cannot be switched on or off with the valve
trigger, it should not be used.
The use of other accessories, or other additional items than recommended in these operating instructions,
may include the risk of bodily injury.
Only operate the tool after a thorough training or under supervision of a trainer.
Never exceed the maximum operation pressure.
Follow the valid national provisions in the country of application.
ATTENTION! Never use the hydraulic hose as a lifting handle!
INTENDED USE
The machine is designed for drilling into concrete and masonry. The machine is intended to be
used by professional operators. Only authorized and trained personnel may use, maintain and
repair the machine. The personnel has to be especially instructed on the potential dangers. The
working environment can be: construction site, factory, renovation, rebuilding and building.
Manipulation or modifications to the machine are not allowed. Observe the instructions regarding
the operation, care and maintenance in the operation instruction. Dangers can come from the
machines and the auxiliary materials, if improperly handled or used.
IMPROPER USE
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.
DANGER ZONES
Operational
condition
Life phase
Transport
Operation
Maintenance
22
Normal function
Transport of the
machine in an Drop of the machine
inoperable condition
Machine only works
without actuated
with actuated switch
Machine moves the
tool
Operation at a Breakdown of the
maintenance unit
USE
Malfunction Improper use
Transport of the
machine in an
operable condition
Machine runs
Switch is blocked in
actuated condition
switch
Tool blocks unknown
unknown
machine
Expected use
unknown
unknown
unknown
unknown