Tabla de contenido
Publicidad
Any tool can be dangerous.
Please follow these simple procedures.
They are for your protection.
Remove rings, watches, ties etc. that could be torn by the machine.
Dress properly. Do not wear loose clothing or jewellery, it can be caught in moving parts.
Follow the general current and appropriate Accident Prevention and Safety Procedures.
Never work under the influence of alcohol, drugs or stronger medication.
Always make sure that you have a safe foothold.
Maintain a proper footing and balance at all time. Never work with the machine while standing on a ladder
or leaning against a scaffold.
Secure the working place well. Use clamps or a vice to fix the work piece. This is safer than using hands
and clears both hands for operating the machine.
Hold the machine tight during operation.
Keep your working area clean and uncluttered.
Keep children away and avoid other persons to come into contact with the machine.
Switch off the machine if it stops - for any reason - to avoid the unexpected starting in uncontrolled
condition.
Do not operate the tool if it is damaged, improperly adjusted or not completely and correctly assembled.
Check hydraulic hose for damage.
Avoid sparks in hazardous environment - created by the drill. Always flush material and drill for cooling with
sufficient water during working.
Do not employ machines by excessive force. Their performance is better and safer, if they work at the
prescribed speed.
SAFETY INSTRUCTIONS
Wear goggles ( chips – risk of injury)
Wear gloves (cutting damages by sharp edged work pieces)
Wear protective clothing
Wear safety shoes
21
Publicidad
Tabla de contenido
