Soundcore Liberty Neo Manual De Usuario página 6

Double click the multifunction
L R
button on either one of the
2
earbuds
Reset
1
2
Reset the earbuds if you can only hear sound on one side:
1. Open the Bluetooth list on your mobile device and delete
"Soundcore Liberty Neo".
2. Take the earbuds out of the charging case, press and hold
the multi-function button on both earbuds for 5 seconds
until the LED indicator flashes pink, release the button when
the LED indicator turns off.
3. Press and hold the multi-function button again on both
earbuds for 8 seconds until the LED indicator flashes pink,
then release the button when the LED indicator turns off.
07 English
Activate Siri / other
voice control software
3
Soundcore
Liberty Neo
2
4. Place the earbuds back to the charging case for resetting
(Make sure charging case still has power), take the earbuds out
of the charging case once the LED indicator on both earbuds
turns solid white. Now the left earbud will automatically
connect to the right earbud. The connection is successful if the
left earbud flashes slowly and the right earbud flashes rapidly.
If the connection was unsuccessful, place the earbuds back in
the charging case and take them out again and repeat steps
2-4 until the connection is successful.
5. Open the Bluetooth menu on your mobile device, search for
"Soundcore Liberty Neo".
Specifications
Specifications are subject to change without notice.
Earbud Input Rating
Charging Box Input Rating
Charging time
Playtime (varies by volume level
and content)
Weight (product net weight)
Impedance
Driver (full range)
Frequency response
Bluetooth version
Range
Please note that your rights under applicable law governing
the sale of consumer goods remain unaffected by the
warranties given in this Limited Warranty.
5 V 0.3 A
5 V 1 A
1.5 hours
5 hours
51 g / 1.8 oz
16 Ω
6 mm × 2
20 Hz - 20 KHz
V5.0
10 m / 33 ft
English 08