Fermax LYNX DIGITAL PANEL Manual De Instalador página 36

This panel includes a basic access control to allow users door opening by dialling a 4/
EN
5/6 digit code. This function must be enabled.
Dial '0' and enter the code.
If you have an auxiliary proximity card connected to the digital display, present the
identification device (card) to open the door.
The option of connecting any commercial Proximity Reader (with Wiegand 26, 32 or 44
bits protocol or data/clock protocol).
Important Notes:
- To add users to the panel you need the Property Management Unit (Guard Unit) software).
- All programming data is defined in their corresponding manuals (all available at
www.fermax.com):
•
97746 Digital Lynx Programming Manual
•
97748 Skyline Lynx Display Manual
•
97744 Lynx panel web server
•
97742 Property Management Unit
Code
Proximity Reader
Pag 36
manual.
Lynx (Guard Unit).