V2 PROTEO12-D Manual De Instrucciones página 16

Operation of the keys
The keys operate differently depending on the operating mode of
the remote.
Manual mode
UP Transmits by radio an opening command
STOP Transmits by radio a stop command
DOWN Transmits by radio a closing command
- Selects the desired radio channel
(1 to 12) or all channels
SELC - Changes the operating logic from
MANUAL to AUTO (continuous
pressure on the key for 10 seconds)
- Selects the desired channel group
(1 to 8)
SELG - Activates groups programming
(continuous pressure on the key for 10
seconds)
Allow navigation of the groups
UP - DOWN - MENU
programming menu
Modalità AUTOMATICA
- Allows you to scroll through the days
of the week to see if there are
scheduled events.
SELC
- Changes the operating logic from
AUTO to MANUAL (continuous
pressure on the key for 10 seconds)
Allows you to view the scheduled events
SELG
on a given day
Allow navigation in the programming
UP - DOWN - MENU
menu
Activates programming (continuous
MENU
pressure on the key for 5 seconds)
Functioning of the button PROG and
DIP-SWITCHES
(MANUAL mode)
The button PROG and the DIPSWITCHES program the functions of
the control units controlled by the transmitters PROTEO.
Read carefully the section "PROGRAMMING OF THE FUNCTIONS
BY MEANS OF TRANSMITTERS OF THE RANGE PROTEO" in the
handbook of the control unit or in the one of the tubular motor
with integrated electronic card.
SELC
DIP-SWITCHES
PROG
14
SELG
UP
STOP / MENU
DOWN