V2 PROTEO12-D Manual De Instrucciones página 24

Copying scheduled events
This procedure allows you to copy a scheduled event to other days
of the week.
1. The remote must be in AUTO mode.
If it is in MANUAL mode, press SELC for 10 seconds,
the display shows (example)
2. Press the MENU key until the PROG icon turns on while
EVENT blinks
3. Press the MENU key to confirm:
EVENT is steadily on and the icon of the day (e.g. Su) blinks.
4. Select the day of the event to be copied using the
UP / DOWN keys and press MENU to confirm.
The display will show event number 1
5. Select the event to be copied (1 to 5).
6. Press the MENU key to confirm, Edit blinks:
7. Press the DOWN key, CoPY blinks
8. Press the MENU key to confirm, the icon of the day
(in this case Su) blinks.
9. Using the UP and DOWN keys, select the day to which you
want to copy the event (example)
10. Press the MENU key: the event is copied to the first available
event of the selected day
11. The icon blinks for 2 seconds to confirm that the operation
was successful, then stays on for 10 seconds.
NOTE: If no event of the selected day is available,
the copy does not occur and the icon
12. After 10 seconds, programming returns to step 9 to copy the
event to other days.
13. After copying the event, wait for 30 seconds without pressing
any keys.
PROTEO12-D automatically quits programming and the display
returns to normal view.
22
does not blink.