V2 PROTEO12-D Manual De Instrucciones página 23

12. After setting channel 12, press MENU to confirm.
The opening event icon blinks:
NOTE: If you accidentally have not activated any
channel, programming restarts from step 8
13. Select the desired event using the UP and DOWN keys and
press MENU to confirm and proceed.
14. The icon blinks for 2 seconds to confirm that the operation
was successful, then stays on for 10 seconds.
NOTE: If during the 10 seconds of waiting you press any
key, programming returns to step 4.
15. Programming automatically returns to step 4.
16. Repeat the procedure to schedule all the events of the week.
NOTE: If an event must be repeated over several days,
use the COPY menu to speed up the procedure (see
"COPYING THE EVENTS")
17. Once the programming of all events is over, wait for
30 seconds without pressing any keys.
PROTEO12-D automatically quits programming and the display
returns to normal view.
NOTE: If you have scheduled events for the current day,
the icon stays on
21