Maintenance - BABYTREND JG64 Manual De Instrucciones

FOLD / UNFOLD
TO UNFOLD STROLLER
WARNING:
Care must be taken when
unfolding the stroller to
prevent finger entrapment.
CAUTION:
allow children near stroller
while unfolding.
23) • Stand the stroller on the ground with
all three wheels touching the ground.
Release the folding latch, which is
located on the right side (Fig. 23a).
• Lift up on the stroller handle with both
hands until the stroller frame is erected
and locked in the open position (Fig.
23b). The stroller has spring-loaded
latches on both sides of the frame. Test
that both latches are fully engaged prior
to placing your child in the stroller.
17
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Do not
Fig. 23a
Fig. 23b
TESTING FOR PROPER WHEEL INSTALLATION
WARNING:
ALWAYS check the double nut
locking system before each use to ensure that the front
wheel is securely fastened to the frame.
24) • Lift the front wheel off of the ground and
sharply strike the top of the tire (Fig.
24). The wheel should not be loose or
come off.
25) • If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
This nut is located under the footrest
located at the front of the jogger. You
can use a standard crescent wrench
to tighten the nut.
DO NOT OVER
this can cause damage to
TIGHTEN
the wheel housing (Fig. 25).
TIRES
26) • Tires are shipped un-inflated. The tires
should be inflated on a regular basis
to between 20 to 25 p.s.i. Always use
a bicycle style hand air pump to inflate
the tires (Fig. 26). *not included.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

MAINTENANCE

Fig. 24
Fig. 25
Fig. 26
18