Fold / Unfold; Maintenance - BABYTREND TJ16 Manual De Instrucciones

FOLD / UNFOLD

TO REMOVE INFANT CAR SEAT
19)• To remove the Infant Car Seat,
remove both of the short clips from
the seat belt slots on the infant car
seat and pull the Infant car seat
upwards(Fig. 19).
TO FOLD STROLLER
WARNING:
must be taken when
folding and unfolding the
stroller to prevent finger
entrapment.
CAUTION:
allow children near stroller
while folding.
20)•
Close the canopy as described in the
canopy section (step 8). Place the
seat in the furthest recline position
(Step 9).
• Fold the stroller by pulling both
release triggers (Fig. 20a). Press
downward on the stroller handle until
the stroller is completely folded. Fold
the Child Tray down. Lock the release
lever on the right side of the stroller
(Fig. 20b).
15
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 19
Care
Pull both
simultaneously
Do not
Fig. 20a
Fig. 20b
TO UNFOLD STROLLER
CAUTION:
Do not
allow children near stroller
while unfolding.
21)• Unlock the release lever and unfold
stroller frame by pulling backward on the
stroller handle until the frame locks. Push
the Child Tray to the functional position
(Fig. 21).
CARE AND MAINTENANCE
TESTING FOR PROPER WHEEL
INSTALLATION
WARNING:
ALWAYS
check the double nut locking
system before each use to
ensure that the front wheel
is securely fastened to the
frame.
FALL HAZARD
Wheel can detach and cause
tip over. Pull on the wheel to
assure it is securely attached.
22)•
Lift the front of the stroller off the ground,
and pull down on the wheel to make sure
it is secure (Fig. 22).
NOTE: The wheel must not come off.
If you experience front wheel wobble that
is beyond what is normal for use while
walking or jogging you may have to adjust
the front wheel housing nut.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.

MAINTENANCE

Fig. 21
Fig. 22
16