Radio Connector - Key Automation 900CT-101 Manual De Instrucciones

After a breakaway of 1,5 seconds, the electronic force control activates which distributes the power
supply, adjusting the value by means of parameter L.
N.B. for maximum thrust loads refer to current standards.
The CT-101 control unit is compatible with the following Key Automation receivers of the MEMO
snap-in series: 900RXI-22 / 900RXI-42 / 900RXI-42R
The installation of the automation must be performed properly by quali ed personnel in posses-
sion of legal requirements and in compliance with machine directive.
Chec the solidity of existing structures (columns, hinges, doors) in relation to the force generated
by the motor.
Chec that there are suitably sturdy mechanical stops at the end of opening and closing travel of
the doors.
Analyze the ris s of the automation and adopt necessary safety measures and warnings.
install controls (such as the ey selector) so that the user is not in a hazardous position.
Upon completion of installation, chec the safety devices several times, as well as those for sig-
nalling and automation release.
Provide the automation with the EC label or tag that contains the danger information and identi -
cation data.
Give the nal user the instructions for use, safety warnings and the EC declaration of conformity.
Ma e sure the user understands proper automatic, manual and emergency operation of the auto-
mation.
Inform the user in writing (for example in the instructions for use) of any unprotected residual ris s
and foreseeable improper use.
Provide a maintenance schedule for the system (at least every 6 months for the safeties) with an
appropriate register of wor performed.
Keep this instruction manual for future reference.
Key Automation S.r.l. reserves the right to ma e, at any time, any modi cations which may be
required to improve appearance and/or operation.
This product is composed of various components which may in turn contain pollutants.
Do not dispose of it in the environment! Find out about the method for recycling or dis-
posing of the product in compliance with current local laws
ADJUSTMENT OF MOTOR FORCE

RADIO CONNECTOR

FINAL WARNINGS
DISPOSAL
16