Peg-Perego Bassinet Pop-Up Instrucciones De Uso página 10

APPROVED BY THE MANUFACTURER.
• TAKE CARE WHEN ADJUSTING THE
MECHANISMS (HANDLE, BACKREST)
WITH THE CHILD IN THE PRODUCT.
• IF A SHEET IS USED, CHECK THAT
DIMENSIONS FIT THE DIMENSIONS OF
THIS BASSINET.
• STRINGS CAN CAUSE STRANGULATION!
DO NOT PLACE ITEMS WITH A STRING
AROUND A CHILD'S NECK, SUCH AS
HOOD STRINGS OR PACIFIER CORDS.
DO NOT SUSPEND STRINGS OVER A
BASSINET OR CRADLE OR ATTACH
STRINGS TO TOYS.
• DO NOT PLACE THIS BASSINET NEAR A
WINDOW OR A PATIO DOOR WHERE A
CHILD COULD REACH THE CORD OF A
BLIND OR CURTAIN AND BE STRANGLED.
• THIS PRODUCT IS DESIGNED TO HOLD
A SLEEPING BABY. WHEN THE CHILD
IS ASLEEP, THE BASSINET BACKREST
SHOULD BE FULLY LOWERED.
NOTICE
THIS ARTICLE MEETS OR EXCEEDS ALL
REQUIREMENTS COVERED IN ASTM F
2194 STANDARD AND LATEST REVISIONS.
Instructions for use
1• OPENING THE BASSINET POPUP: Turn the handle
of the BASSINET PopUp upwards;
2• unhook the two Velcro straps on both sides
as shown (Fig. a, arrows a) and lift the Bassinet
PopUp upwards with the handle (Arrow b);
3• To open and lock the base in the open position,
move the sliders from the centre of the base
towards the two extremities (Fig. c) until they
click into place (Fig. d);
4• close the Velcro straps on both sides of the
Bassinet PopUp.
5• HOOD: the hood comes with 6 side buttons (Fig.
a); moreover, on opening the zip, a mesh insert
allows the parent to monitor the baby (Fig. b).
It is possible to extract a portion of fabric from
the hood in order to protect the child against the
sun (fig_c); this can then be easily repositioned in
the hood when it is no longer required.
6• COVER: place the cover over the Bassinet PopUp;
fasten the buttons on both sides and the elastics
as shown in the figure.
The cover has different characteristics depending
on the collection.
The rubber bands that fasten to the hood allow
the cover to provide greater protection to the
child against the elements.
7• HANDLE: the handle is only locked in the vertical
position (Fig. a).
To lower the handle, press the two side buttons
simultaneously and push it downwards (Fig. b).
The handle is useful to carry the Bassinet PopUp
and fasten it onto the chassis (Fig. c).
8• SLEEPING POSITION: To turn the Bassinet PopUp
into a non-rocking cradle, extract the 4 feet
10