AERMEC FCX ACT 21 Manual De Instrucciones E Instalación página 12

FCX ACT - FAN COIL
Congratulations on your purchase of the Aermec FCX ACT fan coil.
Made with materials of superior quality in strict compliance with safety regulations, the "FCX ACT" is easy to use
and will have a long life.
The FCX ACT fan coil with electronic thermostat, tall
cabinet for vertical installation, varnished with corrosion-
resitant polyester powder, RAL 9002. The delivery grille
and the feet for floor-standing solutions (ZX accessory)
are made of plastic and in RAL 7044.
The FCX ACT fan coil concentrates high technological
and functional characteristics that make it the ideal
climate control unit for all types of rooms.
The supply of climate controlled air is immediate and
distributed throughout the room; FCX ACT generates heat
if included in a heating system with boiler or heat pump
but may also be used in summer as an air conditioner if
the heating system has a water chiller.
The response to the commands is immediate if the
room temperature and water in the tank conditions so
allows; with some special system settings, the delay at
which the fan comes on after the last command can be
up to a maximum of 2'40".
The removable drip tray and fan volute ensure thorough
cleaning of the unit (by specifically trained personnel),
essential for installations in venues subject to crowding
or in those with special hygiene requirements.
The panel comprises:
–(A) on-off selector switch and ventilation mode;
–(B) temperature selector;
–(C) LED indicating the functioning mode (blue,
red and fuchsia);
–(D) yellow LED indicating ventilation request
(or malfunction if flashing).
B
C
A
+
-
D
The quietness of the new centrifugal fan assembly is
such that at normal speed of use you cannot hear when
the FCX ACT cuts in. The use of the electronic control
panel avoids the annoying noise typical of mechanical
thermostats.
The control panel is located under the flap with grille on
the right or left side of the fan coil.
The panel can be protected against tampering, by locking
the cover flap with a screw.
The control panel with electronic thermostat controls
the operating functions of the fan coil to keep the
set temperature in the room, allows the temperature
electronic adjustment, manual and automatic fan speed
change. The heating or cooling functioning mode is
automatically set (season change) and depends on the
temperature of the water circulating in the system.
The FCX ACT fan coil has been designed to meet all
system requirements thanks to its extensive range of
accessories.
Easy installation with reversible hydraulic connections
during installation.
Full respect for accident prevention regulations.
Routine maintenance is reduced to periodic air filter
cleaning with a vacuum cleaner.
V1 = Minimum speed
V2 = Medium speed
V3 = Maximum speed
13