Control Panel; On/Off Button; Advice For Use - Mec MX975 Manual De Instrucciones

If the problem persists we advise you to consult a retailer of manufacturer asking for Assistance
Service specifying the problem and supplying your code (Art.) and serial number (Ser N°) This
information is provided on the INFORMATION PLATE on the back of the machine.
SPARE PARTS
Use only authorized parts for product repair. All interventions shall be carried out by authorized
and specialized technical personnel. Contact the Assistance Centre to request spare parts.
VI.

CONTROL PANEL

Thermostat light
Thermostat knob
ON/0FF button


ON/OFF BUTTON

This button turn the the leavening cabinet on and off.
•
THERMOSTAT KNOB
This knob allows selecting the desired coking temperature.

THERMOSTAT LIGHT
When the heating elements are lit they are on because the internal leavening cabinet temperature
is less than the set by the thermostat value dial. When the light goes off it means that the inside
of the leavening cabinet has reached the set temperature.
VII.

ADVICE FOR USE

Press ON/OFF and turn the temperature dial to the desired value.
HUMIDIFIER
For prooving or to conserve any food, fill the container at the bottom of the proofer cabinet with
water and turn on the appliance, setting the desired temperature. The water will become steam
thanks to the heating of components on the underside of the container.
E n g l i s h 10
|