Linea 2000 DOMO DO926BFK Manual De Instrucciones página 29

2� Remove three screws with suitable tools� Remove the upper hinge then take off carefully the
www.domo-elektro.be
r
3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other
GB
side� Take off the lower door and put it away�
ct
3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other
3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other
GB
GB
side� Take off the lower door and put it away�
4� The disassembly and installation of bottom parts :
A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the
lower hinge�
4� The disassembly and installation of bottom parts :
2. Enlevez les vis et la charnière inférieures, ainsi que le pied réglable situé sous
Note: the refrigerator-freezer incline angle less 45°�
4� The disassembly and installation of bottom parts :
l'appareil.
A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the
lower hinge�
Note: the refrigerator-freezer incline angle less 45°�
3. Enlevez le pied réglable situé de l'autre côté sous l'appareil et déplacez-le vers la
B� Swap over the position of the adjustable foot to the other side of the cabinet�
position correspondante sur le côté opposé sous l'appareil.
B� Swap over the position of the adjustable foot to the other side of the cabinet�
10
4. Fixez les vis, la charnière-étrier et le pied réglable de l'autre côté sous l'appareil.
10
5. Replacez prudemment la porte inférieure. Veillez à ce que la porte soit bien
ajustée, tant horizontalement que verticalement, de manière à ce que les joints
d'étanchéité se referment sur tous les côtés, avant de revisser définitivement la
charnière centrale. Replacez la charnière et vissez-la.
10
6. Placez la porte supérieure. Enlevez l'arrêt de porte. Placez un nouvel arrêt de
porte et vissez-le.
Follow the following stages to reverse the door from its initial position�
fridge compartment door�
1� Remove the hinge cover�
side� Take off the lower door and put it away�
A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the
lower hinge�
Note: the refrigerator-freezer incline angle less 45°�
B� Swap over the position of the adjustable foot to the other side of the cabinet�
Remove three screws
Remove three screws
Remove three screws
29
DO926BFK
Remove the hinge cover
5�
6�
7�
8�
9�