Installation - Vortice VORT HRW 20 MONO Manual De Instrucciones

ENGLISH

Installation

Fig 1 ÷ 38
NOTE: before proceeding with the installation, remove the internal protective packaging in the appliance.
NOTE: before carrying out installation, remove the spacers inside the PVC installation pipe and cut the pipe
according to the wall thickness.
Installation must be performed in accordance with current safety regulations in the destination country, and with the
instructions in this booklet.
The appliance must be mounted within a perimeter wall with a thickness of at least 285 mm.
N.B. For the appliance to work properly, it must be installed with the connector socket located at the top, as shown in
fig. 16
VORT HRW 20 / VORT HRW 20 HCS
1 1
2 2
ø
mm 162
IN
OUT
4 4
3 3
18