Dea NET230N Instrucciones De Uso página 44

Allocation of CHANNEL 1 of remotes
Allocation of CHANNEL 2 of remotes
Allocation of CHANNEL 3 of remotes
Allocation of CHANNEL 4 of remotes
Selection of type of remotes
Selection type of operators
Warning: Selecting the OLI operators, all indicated values related to the operator force (P037 - P038 - P039 -
P040), are automatically set to 100% without any possibility of change. For this type of operator, the obstacle
detection is not active and the adjustment of the thrust force can be executed acting on the operator valves
only.
Selected work with or without encoders.
WARNING: P029 must be set correctly before performing the procedure for programming
Selectioning operators number
Operators speed adjustment during slow-down while opening
Operators speed adjustment during the stroke while opening
Operators speed adjustment during the stroke while closing
Operators speed adjustment during slow-down while closing
Slow down duration adjustment while opening
Slow down duration adjustment while closing
Operator 1 force adjustment while opening
(if = 100% obstacle detection deactivated)
Operator n.1 force adjustment while closing
(if = 100% obstacle detection deactivated)
Operator n.2 force adjustment while opening
(if = 100% obstacle detection deactivated)
Operator n.2 force adjustment while closing
(if = 100% obstacle detection deactivated)
Automatic closing times adjustment
(if = 0 automatic closing deactivated)
Pedestrian automatic closing time adjustment
(se = 0 pedestrian automatic closing deactivated)
Pedestrian stroke duration adjustment
42
Warning: For operators without
encoder, speedness during the
stroke while opening/closing
(100%) and slow down speedness
while opening/closing
are fixed independently from set
values.
Warning: For operators without
encoder: while adjusting the force,
obstacle detection during
slowdown is ignored.
(30%)
the