SICE PT 230 E STD Manual De Instrucciones página 24

• Install the arm with bead breaker disc on the power unit fig. 6
• Fix the mobile arm to the power unit (fig. 7)
• Install the filter/lubricator unit on the back of the power unit in the position shown in fig. 9.
• Fix the bundle of pneumatic pipes leading from the mobile arm to the power unit using the clamps supplied
(Fig. 9).
• Connect the 2 small diameter pneumatic pipes to the power unit cylinder. Fix the pipe leading to the
bottom part with the clamps (fig. 9)
24
PT 230 E - Operator's manual + spare parts
6
7