SICE PT 230 E STD Manual De Instrucciones página 29

- Start rotation and take the tyre off. (fig. 19)
WDK
fitting the tyres
- Place the tyre on the rim and tilt the column
forwards and fit the first bead (fig. 20).
- Position the top bead under the mounting/
demounting tool, simultaneously position the
bead depressor roller and the bead depressor
block near the mounting/demounting tool, press
the down lever until the rim pressing roller lowers
to under the top edge of the rim (fig. 21).
PT 230 E - Operator's manual + spare parts
WDK
19
- Press the rotation pedal and mount the tyre
(fig.22).
WDK
20
You will notice that the rim pressing roller that
keeps the bead under the head of the mounting/
demounting tool and the bead depressor block
follow the wheel in its rotation, keeping the bead
inside the channel, thus guaranteeing correct
mounting without the operator having to use his
hands.
NOTE: stop rotation when the bead depressor is
near the mounting/demounting tool.
21
UK
22
29