Installation Of The Appliance; Room Ventilation - Blanco BC CH 4200 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66

INSTALLATION OF THE APPLIANCE

All installation stages must be considered right from
production of the general layout. Before starting
these stages, as well as deciding the place of instal-
lation, if necessary, the person authorised to carry
out these operations must organise a "safety plan"
to protect the people directly involved, and he must
also ensure strict compliance with all legal require-
ments, especially those relating to mobile work-
sites.
The place of installation must have all the connec-
tions needed to supply the appliance and dispose of
the production residues, must be suitably lit and
must meet all legal health and hygiene require-
ments to prevent the contamination of the foods.
If necessary, fix the exact position of each individual
appliance or subassembly by mark coordinates to
locate them correctly.
Install at least 5 cm from the wall behind the appli-
ance.
Install in accordance with the relevant legislation,
regulations and specifications in the country of use.
Important
During installation and use, make sure that
the air intake and discharge ducts are un-
obstructed.
Important
When installing the appliance on the vari-
ous types of base counters available as ac-
cessories, refer to the instructions supplied
with these items.

ROOM VENTILATION

The room where the appliance is installed must
have air inlets to ensure that the appliance can op-
erate correctly and provide the necessary air ex-
change in the room itself.
The air inlets must be of appropriate size and must
be protected by gratings and placed so that they
cannot be obstructed.
- 13 -
IT
GB
DE
FR
ES
English

Publicidad

Tabla de contenido
loading

Tabla de contenido