Tools And Materials Required - Faro Barcelona GALÁPAGO Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /
VEILIGHEIDSINSTURCTIES / INSTRUZIONI DI SICUREZZA / ΟΔΗΓΊΕΣ ΑΣΦΑΛΕΊΑΣ / ИНСТРУКЦИИ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
CAUTIONS
ENGLISH
Read entire booklet carefully before beginning installation and save these instructions.
To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these
instructions, and use only the hardware supplied.
To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers
to the outlet box and associated wall switch location.
All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, you should
use a qualified electrician.
To reduce the risk of personal injury, do not bend the blade attachment the system when installing, balancing or
cleaning the fan. Never insert foreign objects between rotating fan blades.
The fan blades cannot be installed lower than 2,3m from the floor.
To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the lead wires.

TOOLS AND MATERIALS REQUIRED

ELECTRICAL OUTLET BOX
INSTALL MOUNTING BRACKET
Attach the hanger bracket to outlet box using screws
provided with outlet box. Install square rubber washer
between bracket and outlet box to reduce vibration of
metal to metal surface.
To reduce the risk of fire, electrical shock, or personal
injury, mount to outlet box marked acceptable for fan
support and use mounting screws provided with the
outlet box. Most outlet boxes commonly used for the
support of lighting fixtures are not acceptable for fan
support and may need to be replace. Consult a qualified
electrician if in doubt
galápago
ref. 33301, 33302
Secure the
outlet box
suitable for fan
support direct to
the building
structure. Wood
joist and outlet
box must beable
to support a
minimum of 50
pounds.
faro 13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3330133302

Tabla de contenido