Preparation For Use; Filter Installation - Sharp KC-850U Manual De Operación

PREPARATION FOR USE

FILTER INSTALLATION

To maintain the quality of the filters, they are packed in plastic bags and placed in
the unit. Be sure to remove the filters from the plastic bags and replace the filters in
the unit before initial use.
1
Remove the filters
1
Remove the Back Panel.
Gently push down on the tabs,
then tilt and remove the back
panel.
Back Panel
2
Remove the Washable
Deodorizing filter (black)
and True HEPA filter
(white) from the plastic
bags.
True HEPA filter
(white)
Washable
Deodorizing
filter (black)
Tabs on the top
Unplug the unit before installing
or adjusting the filters.
2
Install the filters
1
Install the True HEPA filter.
Please make sure that the True HEPA
filter is placed in proper orientation.
Installing the filter backwards
will affect the performance of
the unit.
True HEPA filter
2
Insert the Back Panel's 2 bottom tabs
(left and right) into the small holes in the
unit, and slide the Washable Deodorizing
filter between the True HEPA filter and
the Back Panel.
Washable Deodorizing filter
Back Panel
Bottom tabs
3
Gently push in the
upper tabs (left
and right) to lock
in place.
Upper tabs
4
Fill in the usage
start date and
place on the unit as
guide for when the
filters should be
replaced.
Date Label
E-0