Troubleshooting
Connected USB device does not charge
■
Weather station is not being operated on mains power .
Connect the mains adapter z to the weather station .
■
No plug connection to USB device .
Check the plug connection .
■
The charging current of the connected device is too high
(> 2 .1 A) .
The device cannot be charged by the weather station .
Connection cannot be made to the outdoor sensor .
■
Disruptive obstacles or other interference sources such as
concrete walls or other radio transmission devices are located
between the weather station and the outdoor sensor .
Change the installation location and try again .
■
Distance between weather station and outdoor sensor is too
great .
Decrease the distance . "Visual contact" between the
outdoor sensor and the weather station often improves
the transmission .
■
The batteries in the weather station or the outdoor sensor are
dead .
Replace the batteries .
AFW 2 A1
GB │ IE
│
61
■