Displaying The Indoor Temperature; Displaying Temperatures In °C / °F; Displaying The Air Humidity (Indoor); Displaying The Maximum / Minimum Temperature / Humidity - Auriol Z29536 Instrucciones De Utilización Y De Seguridad

All manuals and user guides at all-guides.com
Displaying the indoor
Q
temperature
The current Indoor temperature 3
the LC display.
Displaying temperatures
Q
in °c / °F
note: °C is the legally required temperature unit.
note: The weather station is supplied in the
default setting of °Celsius.
j
Press the "+" / °C / °F button
between the Celsius and Fahrenheit tempera-
ture scales.
Displaying the air humidity
Q
(indoor)
The current air humidity is shown in the LC
5
display. The Comfort indicator
4
air humidity in three categories.
The following categories are available:
"Dry" = Air humidity
5
"Comfort" = Air humidity
5
indoor temperature
24 °C - 27.9 °C
"Wet" = Air humidity
5
Displaying the Maximum /
Q
Minimum temperature /
Humidity
The minimum / maximum temperature / humidity is
measured for the first time after the batteries have
been inserted and stored in the weather station.
j
Press the "–" / MAX / MIN button
The maximum indoor and outdoor tem-
3
perature measured and the maximum
24
humidity measured are shown.
5
j
Press the "–" / MAX / MIN button
briefly. The minimum indoor 3
temperature 24 measured and the minimum
humidity 5 measured are shown.
j
Press the "–" / MAX / MIN button
briefly to return to the current values.
note: If no button is pressed within 5 seconds,
the displays automatically return to the
standard display.
j
Hold the "–" / MAX / MIN button
for approx. 3 seconds in order to delete the
stored maximum and minimum values when
you hear a beep sound. The values measured
from the time of deletion of the old values
until the next time the memory is called up
can be called up again.
Operation / Troubleshooting

Backlight

Q
j
Press the SNOOZE / LIGHT button
is shown in backlight illuminates for 3 seconds.

Battery state display

Q
The Battery state indicator
weather station's LC display if the batteries are
weak. Make sure you replace the batteries at the
earliest opportunity (see "Replacing the batteries").

replacing the batteries

Q
28 to switch
Weather station:
You should replace the batteries if the display
becomes unclear.
j
Remove the battery compartment cover on
the back of the weather station.
j
Remove the used batteries.
j
displays the Insert 3 new batteries type AA 1.5 V
(Mignon, LR06).
note: Make sure you fit the batteries the
right way round (polarity). The correct polarity
is shown inside the battery compartment
j
< 45 % Close the battery compartment
j
45 - 75 %, Press the RESET button
light up briefly.
3
> 75 % Outdoor sensor:
note: For this step you need a flat-blade
screwdriver.
j
Open the battery compartment cover on the
rear of the outdoor sensor by turning the
screw in an anticlockwise direction with the
flat-blade screwdriver.
j
Remove the used batteries.
j
Insert 2 new batteries of type AAA 1.5 V
(Micro, LR03).
briefly. note: Ensure the correct polarity. This is
29
shown in the battery compartment
j
Close the battery compartment cover and
tighten the screw in a clockwise direction.
again
29
and outdoor

troubleshooting

Q
note: This appliance has delicate electronic
again
29
components. This means that if it is placed near
an object that transmits radio signals, it could
cause interference. This could be, for example,
mobile telephones, walkie talkies, CB radios,
down remote controls and microwaves.
29
j
If the display indicates a problem, move such
objects away from it or remove the batteries
for a short while and then replace them.
12 . The
appears in the
23
34 .
.
34
. All the symbols
33
.
40
GB/MT 43