Inserting/Replacing The Battery - Skil 8602-RL Instrucciones De Funcionamiento Y Seguridad

Inserting/Replacing the
Battery
!
WARNING
main power switch before removing
and replacing batteries.
Alkaline batteries are recommended
for the tool.
Always replace all batteries at the
same time. Use only batteries from
one brand and with the identical
capacity.
Remove the batteries from the tool
when not using for extended periods
When storing for extended periods,
the batteries can corrode and
discharge themselves.
When inserting, pay attention to the
correct polarity according to the
representation of the inside battery
lid.
It is the user's responsibility to
periodically check the accuracy
of the measuring tool as work
WARNING
!
continuous vibration or extremely
hot or cold temperatures.
Always store the tool indoors.
Always keep the tool free of dust,
moisture and direct sunlight.
Clean the tool with a damp cloth and
mild soap.
Always remove the batteries before
cleaning the lens.
Preparation
ALWAYS turn off
the laser and the
Maintenance
Do not expose
the tool to
progresses. Always check the
accuracy of the measuring tool
after it has been dropped or subject
to extreme temperatures and
temperature variations.
To open the battery compartment
M, turn the locking knob counter
clock-wise and pull out the battery
compartment.
Always replace all batteries at the same
time. Only use batteries from one brand
and with the identical capacity.
Shut the battery compartment M and
turn the locking knob clock-wise.
In case the batteries have been
inserted incorrectly, the measuring
tool cannot be switched on. Insert the
batteries with
correct polarity.
!
WARNING
the tool when not using it for
extended periods. When storing for
extended periods, the batteries can
corrode and discharge themselves.
Do not disassemble or modify the
tool in any way.
Do not attempt to change any part of
the laser lens.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries
instead of disposing of waste.
The unit, accessories, packaging
& used batteries should be
sorted for environmentally
friendly recycling in accordance with the latest
regulations.
-10-
2
Remove the
batteries from