Wall-Mounted - Skil 8602-RL Instrucciones De Funcionamiento Y Seguridad

Leveling of Tool in Vertical
Position
- place the tool in vertical position
(with side-plate G beneath) on a flat
surface or on the tripod
- Level the tool by turning leveling
screw J in such a way that the
bubble in level L is centered
Check the leveling after each
adjustment
Projecting Points
For making references on a longer
distance
- Place the tool on a flat surface or on
the tripod
- Level the tool in case of horizontal
or vertical reference lines
- Switch on the tool
- Align the projected laser point with
your target point by turning rotary
head D manually
Check the leveling after each
adjustment
Projecting Plumb Points
- Place the tool on a flat surface
- Level the tool
- Switch on the tool
- A plumb point is projected on the
ceiling
Check the leveling after each
adjustment
6 7
8
9
-13-
Working with

Wall-Mounted

For work exceeding the extension
height of tripods, the tool can be
mounted to the wall as illustrated
Ensure the tool is mounted properly
and cannot fall down
Mounting of Tool
on Tripod
- Unfold the tripod
- Lock the tripod with ring Q
- Adjust length of 3 legs with clips R
- Adjust length of rod S with handle T
- Lock rod S with knob U
- Mount tool on tripod as illustrated
- Use adapter P for mounting tool in
vertical position
When working with the tripod on
uneven surfaces, level the tripod itself
by adjusting leg lengths with clips R and
checking bubble level O
When using the tripod the tool can
be used in any inclined position for
projecting lines under any desired
angle.
Laser Enhancing
Glasses
- For improving the view of the laser
line
These glasses will not protect your
eyes against laser radiation
10
11 12
.
1
13