Skil 8602-RL Instrucciones De Funcionamiento Y Seguridad página 8

PERSONAL SAFETY
Stay alert, watch what you are doing
and use common sense when
operating a measuring tool. Do not
use a measuring tool while you are
tired or under the influence of drugs,
alcohol or medication. A moment of
inattention while using a measuring tool
may result in serious personal injury or
incorrect measurement results.
Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
DO NOT use the laser enhancing
glasses as safety goggles. The
laser enhancing glasses are used for
improved visualization of the laser
beam, but they do not protect against
laser radiation.
DO NOT use the laser enhancing
glasses as sun glasses or in traffic.
The laser enhancing glasses do not
afford complete UV protection and
reduce color perception.
DO NOT use any optical tools such
as, but not limited to, telescopes
or transits to view the laser beam.
Serious eye injury could result.
DO NOT stare directly at the laser
beam or project the laser beam
directly into the eyes of others.
Serious eye injury could result.
Use caution when using measuring
tools in the vicinity of electrical
hazards.
WARNING
!
Spirit Level leaks, soak up with
appropriate absorbent material
and dispose of safely. Spirit Level
contains flammable liquid that may
cause respiratory tract, eye and skin
irritation.
USE AND CARE
Use the correct measuring tool
for your application. The correct
measuring tool will do the job better
and safer.
Do not use the measuring tool if
the switch does not turn it on and
off. Any measuring tool that cannot be
controlled with the switch is dangerous
and must be repaired.
Store idle measuring tools out of
the reach of children and do not
allow persons unfamiliar with the
measuring tool or these instructions
to operate the measuring tool.
Measuring Tools are dangerous in the
hands of untrained users.
Maintain measuring tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
measuring, detection and layout
tools operation. If damaged, have
the measuring tool repaired before
use. Many accidents are caused by
poorly maintained measuring tools.
Use the measuring tool, accessories,
etc., in accordance with these
instructions and in the manner
intended for the particular type of
measuring tool, taking into account
the working conditions and the
work to be performed. Use of the
-8-
Wear eye
protection. If