Receiving A Call; Making A Call - Sytech Easy Talk SY-1490 Manual Del Usuario

of the entries in your phonebook, the caller's name stored in the phonebook will be displayed along with the
name.
When you receive new calls, "NEW" will flash on the display. The screen will display "ALL 000" and "NEW 000"
to indicate all calls received from caller IDs and new caller ID. If the new incoming call is a repeated number,
"REP" will be displayed under "NEW".
"PRIVATE CALL", "OUT OF AREA" and "ERROR" maybe shown in the cases:
"PRIVATE CALL" will be displayed when the caller prefers the number to be hidden.
"OUT OF AREA" indicates the call comes from an area where Caller ID service is not supplied.
"ERROR" represents an incorrect incoming signal.
The current date and time will be updated by the FSK Caller ID signal while the year setting remains
unchanged. DTMF Caller ID signal will not change the date and time setting as it only contains the caller's
number.

Receiving a call

From handset
1. Pick up the handset and talk to the other party.
2. When finished, return the handset to the base.
Switching to speakerphone
1. When using the handset, press
2. When finished, press
From speakerphone
1. When the telephone rings, press
clearly, speak into the speaker from a distance of 32cm or less.
2. When finished, press
NOTE: Generally telecom operators transmit the Caller's ID between the first and the second ring. Therefore to
view the number, answer the phone after the second ring.

Making a call

From handset
1. Pick up the handset.
2. When you hear the dial tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. When finished, return the handset to the base.
From Speakerphone
1. Press key
2. When you hear the dial tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. When finished, press
key and return the handset to the base.
key again.
key and talk to the caller. For the other party to hear your voice
key again.
key again.
15