Safety Instruction; Safety Conditions - Sytech Easy Talk SY-1490 Manual Del Usuario

INTRODUCTION
Thank you for having purchased the new Caller ID telephone SYTECH SY-1490. This manual is designed to
familiarize you with this phone. To get the maximum use from your new phone, we suggest that you read this
Instruction Manual carefully before operating it.

SAFETY INSTRUCTION

When using your telephone equipment, the following basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons:
1. Read and understand all instructions
2. Follow all warnings and instructions.
3. Do not install the unit near: extreme temperatures, direct sunlight, dusty areas.
4. Do not disassemble the unit. Contact Sytech Hotline Service center for a proper repair or exchange.
5. Never install the unit during a lightning.
6. Do not obstruct the line cable or step on it.
7. Do not install your telephone box in humid areas.
8. Unplug your telephone from the wall outlet before cleaning it. Use only a damp cloth for cleaning.
9. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage.
10. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
11. Do not insert objects through the cabinet slots as these may come in contact with dangerous voltage points
and can cause a risk of electric shock.
12 Never spill liquid of any kind on the product.
Battery Precautions
In order to avoid any risk of electrical shock or injury, read and follow the below instructions.
. Do not throw away the defected batteries to fire. These can explode. Inform yourself to the dealer
where these can be recycled.
. Do not open or damage the batteries. The internal electrolyte is corrosive and can damage the eyes or skin.
It is a toxic element by ingestion.
. Do not attempt to recharge the batteries. These can leak out the corrosive electrolyte and can burst.
. When inserting the batteries into the unit, check the polarity. Inverse polarity can cause the battery to
discharge and the electrolyte to leak.
. Remove the batteries from the unit when it is not in use for a long period of time. (few months or more) as
these can produce an internal leakage.
NOTE: Preserve this manual carefully for future reference.

SAFETY CONDITIONS

•
The device cannot be connected to an IT battery supply.
•
The connection of the telephone line and the combined respond to the safety level TRT-3
•
The electric safety corresponds to the verifications of NF EN 60950 and the amendments A1, A2,
A3 and A4.
•
The maximum operating temperature is of 35ºC
2