Sytech Easy Talk SY-1490 Manual Del Usuario página 9

Adjusting the LCD Contrast
Please refer to "LCD contrast adjusting" under the MENU SETTING option.
Language Selection
There are 2 languages programmed on this device. The default language programmed is SPANISH.
In order to change the language, follow the next steps:-
1. Whilst either on-hook or off-hook, press the SET/ST key.
2. Press the UP/+ key once for the LCD screen to display LANGUAGE.
3. Press the SET/ST key. The language options will flash on the LCD display.
4. Use either the UP/+ or DOWN/－keys to switch from the default language to either English or Spanish.
5. Finally, press the SET/ST key again to confirm your selection.
Dialling a Number
There 3 ways in which you can dial a number.
Basic Dialling
1. Lift the phone off the hook or press the
2. Wait for the tone to sound and then dial the desired number.
Pre-dialling
1. Dial the number
2. Lift the phone off the hook or press the
3. The number previously typed will dial automatically within a couple of seconds
Redial the last number
1. Lift the phone off the hook and press the REDIAL button
2. The phone will automatically dial the last number called
3. If using the hands free function, press the
Hands free
This function allows the user to speak without the necessity of lifting up the handset off the hook:
To call using Hands free
1. Simply press the
icon.
icon
icon followed by the REDIAL button.
button.
9