Mute Function; Do Not Disturb Function - Sytech Easy Talk SY-1490 Manual Del Usuario

On On-hook mode, while reviewing an incoming call number, press the "SET/ST" key. The screen will display
"STORE" on the top left corner. Press M1 or M2 keys to save the number accordingly.
Store to two-touch memory
You also can store an incoming call in two-touch memory key 1 to 9.
On On-hook mode, while reviewing an incoming call number, press the "SET/ST" key. The display will show
"STORE" on the top left corner. Press numeric key to directly store the incoming call number into the numeric
key(1 to 9).
Make a call from two-touch memory
There are 4 different options for making a two touch memory phone call.
1. On On-hook mode, press the "RECALL" key and the screen shows "PICK-UP ". Press the numerical key
in which the two-touch memory number is stored. Then press
handset to dial out the number directly.
2. On On-hook mode, press and hold the FLASH key for 3 seconds until "PICK-UP " is displayed. Press the
numerical key in which the two-touch memory number is stored. Then press
or pick up the handset to dial out the number directly.
3. On Off-hook mode, press the "RECALL" key and the screen shows "PICK-UP ". Press the numerical key
in which the two-touch memory number is stored. The number will be dialled out direclty.
4. On Off-hook mode, press and hold the FLASH key for 3 seconds until "PICK-UP " is displayed. Press the
numerical key in which the two-touch memory number is stored. The number will be dialled out direclty.
LOCKING THE PHONE
When turning the key to the yellow point: All numbers will be locked .
When turning the key to the green point: All numbers starting with "0" will be locked. (If PABX code is set to
(0-9), the "0" locked function is invalid)
When turning the key to the red point: All numbers are allowed to be dialled out.

MUTE FUNCTION

During the conversation, you can at any time use the mute function. Press the "DEL/MUTE" key to disable the
microphone. Press the "DEL/MUTE" key again to return to normal conversation mode.

DO NOT DISTURB FUNCTION

1. While on on-hook state, press the "BRI/DND" key. The LCD will display SLEEP 00-00
Press the UP/+ or DOWN/- keys to adjust DND "Do Not Disturb" time by every half an hour.
2.
Press the BOOK/÷ key to confirm the "DND" mode. When the phone returns to standby mode, the LCD
3.
will display the "DND" time remaining.
For example, when the unit is on "DND" state, the LCD will display SLEEP 02-41. This means the DND time
remaining is 2 hours and 41 minutes. During DND time, the unit and alarm will not ring.
key, " BACK/HOLD" key or pick up the
18
key, " BACK/HOLD" key