Sytech Easy Talk SY-1490 Manual Del Usuario página 16

Redial function
1. Pick up the handset or press
Press REDIAL/P key for the last dialled number to be dialled again.
2.
Pre-dial function
1. In on-hook state
Dial the desired number, if any mistake press DEL/MUTE key to edit.
2.
3. Pick up the handset or press
REVIEWING INCOMING AND OUTGOING CALL NUMBERS
Reviewing incoming call number
While on on-hook or off-hook state, press the UP/+ or DOWN/- key to review incoming call numbers one by
one. After all incoming call numbers are reviewed, the LCD will display: ---END OF LIST---,
Reviewing outgoing call number
While on on-hook or off-hook state, press OUT/× key to review the outgoing call numbers and
1.
conversation time from the last to the first calls. While reviewing, press the UP/+ key to check outgoing
calls above.
2. Once all the outgoing call numbers are reviewed, the LCD will display:
3. If you wish to delete a number, press the DEL/MUTE key once. The LCD will display DEL. Press the
DEL/MUTE key again to confirm and delete the number. To delete all the numbers, press and hold DEL/MUTE
key for 3 seconds. The LCD will display DEL ALL? .Press the DEL/MUTE key to confirm and all numbers will
be deleted.
CALLING BACK INCOMING AND OUTGOING NUMBERS
Calling back incoming call numbers
1. While on on-hook state, review incoming call numbers to find a desired number.
key, BACK/HOLD key or pick up the handset, to dial out the number.
2. Press
Otherwise, press BACK/HOLD key twice and it dials out along with the long distance code.
3.
4. If a PABX code has been set in advance, and the number is of 7-digits or more, it is dialled out along with
the PABX code;
5. Otherwise, press BACK/HOLD key twice to dial out along with PABX code, pause time and long distance
code.
Calling back outgoing call numbers
1. In on-hook state, review outgoing call number to find a desired number,
key, BACK/HOLD key or pick up the handset, to dial out the number.
2. Press
Otherwise in off-hook state, review and find a desired outgoing number and press BACK/HOLD key to
3.
dial it the number.
key,
key to dial out the number.
16
---END OF LIST---,