Technical Characteristics; Lifting; Transportation - Pentair DHR Serie Manual De Instrucciones

EN

2.2 TECHNICAL CHARACTERISTICS

•
Dimensions and weights of machines:
See "Product Specifications",
paragraph "Dimensions and weights"
2.2.1 NOISE
The maximum continuous noise equivalent to weighed noise A of acoustic vibrations generated by the machine: 82 dB (A)
2.2.2 LIABILITY
PENTAIR INTERNATIONAL S.a.r.l. declines any liability in the event of failure to comply with the values indicated in this paragraph.
CHAPTER 3
INSTALLATION

3.1 LIFTING

The machine can be lifted in the following condition, machine packed in a cardboard box.
3.1.1 MACHINE WITHOUT ANY TYPE OF PACKING
It is possible to lift several machines packed in a cardboard box, depending on the machine weight.

3.2 TRANSPORTATION

The machine must be transported in the following conditions:
•
Machine in horizontal position.
DANGER
Ascertain that the conditions referred to in the points above are met during transportation.
24
•
Electric data:
See "Product Specifications",
paragraph "Electric suply" and
identification nameplate
•
Machine in fixed position without
possibility of moving
•
Pressure:
maximum operating pressure: 6 bar
(90°C) or 10 bar (50°C)
•
Machine protected from atmospheric
agents