Connecting To Power Supply - Stihl FSE 60 Manual De Instrucciones

STIHL AutoCut C 6-2
Slip the mowing head (2) over the
N
shaft (3) and engage its hex recess
on the external hexagon (4).
Hold mowing head (2) steady with
N
one hand.
Turn the cap (1) clockwise and
N
tighten it down firmly by hand.
Removing the Mowing Head
Hold the mowing head steady.
N
Unscrew the cap counterclockwise.
N
FSE 60

Connecting to Power Supply

The voltage and frequency of your
1
power supply and the voltage and
frequency specified on the unit must be
the same. Use an extension cord
2
specifically approved for outdoor
applications.
3
Extension Cords
4
120 V version
Minimum wire gauge for extension
cords for 120 Volt appliances using
0 - 6 amps:
Cord length (ft)
Wire size (AWG) 18 16
230 V version
Minimum cross sectional area of wires:
Cord lengths of 6,5 ft (2 m) or more:
2
1,5 mm , type H07 RN - F
25 50 100 150
16 14
N
Strain Relief
The strain relief (cord retainer) protects
the appliance cord against damage.
1
2
Insert the plug (1) into the extension
cord coupling (2).
English
15