Ink Cartridge Safety Instructions; Lcd Screen Safety Instructions - Epson WF-100 Guía De Referencia Rápida

Ocultar thumbs Ver también para WF-100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

If battery acid gets into your eyes or on your skin, immediately rinse the affected area
thoroughly with water and seek medical treatment. Otherwise, permanent eye damage
could result.
If liquid leaks from the product (or the product has a bad odor), move the product away from
flammable objects. Otherwise, electrolyte leaked from the battery will catch fire or cause smoke
or flame.
Do not drop or throw the product or subject it to strong shocks. Otherwise, the battery could
leak or the protection circuit in the battery could be damaged.
Do not use the product if it is leaking or damaged in any way.
Do not leave the product in a vehicle. Otherwise, the battery could overheat.

Ink Cartridge Safety Instructions

Keep ink cartridges out of the reach of children and do not drink the ink.
Be careful when you handle used ink cartridges; there may be ink remaining around the ink
supply port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes,
flush them immediately with water.
Do not put your hand inside the product or touch any cartridges during printing.
Install a new ink cartridge immediately after removing an expended one. Leaving cartridges
uninstalled can dry out the print head and may prevent the product from printing.
Do not touch the green IC chip on the side of the cartridge. This may prevent normal
operation.
Do not shake cartridges after opening their packages; this can cause them to leak.
If you remove an ink cartridge for later use, recap the ink cartridge using the cap that came with
it to prevent the ink from drying out and to protect the surrounding area from getting smeared
by ink.
Use an ink cartridge before the date printed on its package.
Do not dismantle an ink cartridge. This could damage the print head.
Store ink cartridges in a cool, dark place.
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room
temperature for at least three hours before using it.
Store ink cartridges with their labels facing up. Do not store cartridges upside down.

LCD Screen Safety Instructions

Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.
If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands,
wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes,
flush them immediately with water. If discomfort or vision problems remain after a thorough
flushing, see a doctor immediately.
Do not press too hard on the LCD screen.
Do not use a pointy or sharp object, such as a pen or your fingernail, to operate the LCD
screen.
35
Notices

Publicidad

Tabla de contenido
loading

Tabla de contenido