After-Sales Service And Application Service - Bosch Indego 350 Manual Original

OBJ_BUCH-3008-003.book Page 32 Wednesday, November 29, 2017 12:20 PM
32 | English
Problem Possible Cause
Machine leaves rag- Height of cut too low
ged finish/poor quali-
Mower requires more cuts to finish the garden Allow mower to run for 3 full cuts to cover whole lawn ar-
ty of cut
Cutting blades blunt
Possible clogging
No charging proce- Charging pins corroded
dure possible
Perimeter wire not Wire terminal has become corroded
detected
Height of cut button Possible clogging
stuck
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
It is possible, that your product's software version be re-
quired (see "Menu > Settings > System Options > Info").
If the machine is requested to be sent to the service centre,
the Indego robotic lawnmower, power supply and docking
station must always be sent together.
If your machine has a personalised top cover it should be sent
in with the original top cover.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
F 016 L81 767 | (29.11.17)
Corrective Action
Increase height of cut
ea
Reverse or replace blades (recommended every new
season)
Always turn isolator switch off first, then check under-
neath the mower and clear out as necessary (always
wear protective gloves)
Clean the charging pins
Re-strip the wire for a proper connection
Always turn isolator switch off first, then check under-
neath the mower and clear out as necessary (always
wear protective gloves)
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Power Tools