Sime HOME PLUS Manual De Instalacion Y Uso página 38

– Rotate the encoder
from 36 to 50)
Date
Hour
Cancel
– Press the encoder
click
lect the next "data/value" which will be highlighted (eg. 01)
– Continue in this way until all the necessary modifications
have been made
– After all modifications have been made, press the button
Confirm to go back to the initial submenu (Date and time).
The user must work in a CIRCULAR manner ("rounda-
NB:
bout") therefore, ALWAYS MOVING FORWARDS, even if a mis-
take has been made.
– Rotate the encoder
play).
The "Display Menu" allows the user to adjust:
– display contrast
– duration of the display back-lighting
– encoder back-lighting
38
to modify the "data/value" (eg.
SETTING DATE AND HOUR
DAY MONTH YEAR
01 Jan 2014
HOUR MINUTE
12 : 50
Confirm
to confirm the modification and se-
to select another "Menu" (eg. Dis-
The operating procedure described so far.
GENERAL SETTINGS
Language
Date and time
Visualization
Factory settings
Esc
WARNING
"Factory settings Submenu"
It is recommended that you ONLY go into this submenu
if you want to go back to "Factory settings" deleting all
settings made by the user.
Otherwise, press the button
If you wish to proceed:
– Press the encoder
click
screen appears offering the following options:
CONFIRM REQUEST
Confirm operation?
Cancel
– Press the button
Cancel
lected previously (Factory settings)
– Press the button
Confirm
and after a few seconds go back to the "main menu"
EN
ENG
[...]
[...]
[...]
Back
or
Esc Back
to go into a modifiable area. A
Confirm
to go back to the "Menu" se-
to restore the "Factory settings"
.