Sime HOME PLUS Manual De Instalacion Y Uso página 42

– Or press the button
Confirm
tings" area for the boiler
Parameter Index: 1
Parameter Value: 0
Esc
– where "Parameter index" refers to the parameter table in the
manual of the installed boiler (eg. 1=tS 0.1 or 1=PAR 01).
– Rotate the encoder
rameters and check the value
– If the value of the selected parameter is to be modified:
– Press the encoder
click
area
Parameter Index: 1
Parameter Value: 0
Esc
– Press the encoder
– Press the encoder
click
move on to another parameter.
42
to go into the "Parameter set-
Boiler parameters
1--------49
Back
to scroll through the list of pa-
to go into the value modification
Boiler parameters
1--------49
Back
to set the new value
to confirm the modification and
– Once all the displays/modifications have been completed,
press the button
Esc
Zona
Menu
TECHNICAL ASSISTANCE CENTRE Menu
WARNING
It is useful to enter the TECHNICAL ASSISTANCE
CENTRE references which can then be displayed in
the "Display Menu" and are suggested to the user if
there is a serious fault in the boiler.
To enter the TECHNICAL ASSISTANCE CENTRE references:
– follow the procedure described in section 4.2.3 on page 40
up to the section "go into the submenu".
– Rotate the encoder
submenu"Technical Assistance Centre" submenu.
TECHNICAL
Zone heating [...]
Hot water [...]
Boiler parameters [...]
Reset alarm history [...]
Factory total reset [...]
ˆ
Esc Back
EN
to go back to the "main screen" .
Gi 18 Set 2014 10:30
Off
Modo
to select the required
TECHNICAL
‡
Customer service [...]
Esc Back