Program. Time - Sime HOME PLUS Manual De Instalacion Y Uso

– Press the encoder
click
the "rows"
Function Mode Function Mode
Set AUTO comfort
Set AUTO reduced
Set MAN

Program. Time

Esc
– Press the encoder
click
and go into the modifiable area
Function Mode
Set AUTO comfort
Set AUTO reduced
Set MAN
Program. Time
Esc
– Rotate the encoder
permitted field (eg. MAN - AUTO - OFF)
– Press the encoder
click
and go back to the row "Function mode"
– Rotate the encoder
)
gram. Time
Function Mode
Set AUTO comfort
Set AUTO reduced
Set MAN
Program. Time Program. Time
Esc
48
to confirm "Heating" and go into
Heating
MAN
20.0°C
18.0°C
20.0°C
20.0°C
Back
to confirm the highlighted "Row"
Heating
MAN MAN
20.0°C
18.0°C
20.0°C
20.0°C
Back
to modify the "data/value" in the
to confirm any modifications made
to select another "row" (eg. Pro-
Heating
MAN
20.0°C
18.0°C
20.0°C
20.0°C
Back
4.3.1 Program. time
The Sime HOME PLUS Remote Control allows up to four time
bands to be managed for the domestic hot water function and
the heating function described below.
During the programmed time band, the boiler works in COM-
FORT heating mode while outside the programmed time band
it works in REDUCED heating mode.
– Press the encoder to confirm "Program. time" and go
click
into the modifiable area
HEATING TIME PROGRAM
Day/s:
0 2 4 6 8
[1] 06:00 - 08:00
[2] 11:00 - 13:00
Esc
– Rotate the encoder
the "Group of days"
– Press the encoder to confirm the required selection
click
and go into the first "adjustable time" [1]
HEATING TIME PROGRAM
Day/s:
0 2 4 6 8
[1] 06:00 - 08:00 06:00
[2] 11:00 - 13:00
Cancel
– Rotate the encoder
basis of the required time
EN
MONDAY MONDAY
10 12 14 16 18 20 22 24
[3] -
[4] 18:00 - 23:00
Back
to select the "Single days" or
MONDAY
10 12 14 16 18 20 22 24
[3] -
[4] 18:00 - 23:00
Confirm
to modify the "data/value" on the