Samsung NX58H9950W Serie Manual Del Usuario página 53

Troubleshooting
Problem Possible cause
Oven will not The oven door lock is turned
self-clean. on.
The warming drawer is being
used.
The oven is too hot.
The self-cleaning oven
controls are not properly set.
The door is opened.
Crackling or This is normal.
popping sound.
Action
The display will show the
Lock icon. Hold the oven door
open and press the START/
SET button for 3 seconds. The
oven will beep and the Lock
icon will turn off.
Self-clean will not operate
when the warming drawer
is on.
Let the oven cool down
and reset the controls. The
self-clean cycle will not lock
the oven door if the oven
temperature is too hot. The
door must lock before the
self-clean cycle can start.
Reset the self-cleaning oven
controls. (See page 47.)
Make sure that the door is
closed.
This is the sound of the metal
heating and cooling during
any cooking or cleaning
function.
Problem Possible cause
Excessive This is the first time the oven
smoking during has been cleaned.
a self-cleaning
cycle.
Oven door will This is normal.
not open after
a self-cleaning
cycle.
Oven not clean A fine dust or ash is normal.
after a self-
cleaning cycle.
Action
This is normal. The oven will
always smoke more the first
time it is cleaned.
Wipe up all excessive soiling
before starting the self-
cleaning cycle.
If smoke persists, press the
OFF/CLEAR button. Open the
windows to clear the smoke
from the room. After the oven
has cooled and unlocked, wipe
up excessive soil and reset
the oven for self-cleaning.
The oven door will stay
locked until the oven
temperature drops below
392 °F.
This can be wiped clean with
a damp cloth.
Set the self-cleaning cycle for
a longer cleaning time. The
cycle was not long enough to
burn off the dirt buildup.
Extremely dirty ovens require
hand-cleaning of excessive
spillovers and food buildup
before starting a self-cleaning
cycle. Multiple self-cleaning
cycles may be necessary to
completely clean the oven.
English 53