Manual Pairing - ROTOR INpower ROAD Manual De Usuario

3 .2. .a b. MANUAL PAIRING
If there is more than one ANT+™ power sensor close to you: once INpower is active and
within two minutes of activation (INpower enters sleep mode after two minutes), manually
introduce the INpower "SENSOR ID" into the ANT+™ device.
The "SENSOR ID" can be found on the inner side of the left crank. This serial number can
also be found both under the barcode of the spindle sticker and on the first page of this
manual.
3.b. BLUETOOTH® SMART PAIRING
Connect your ROTOR INpower® with any Bluetooth® Smart compatible device.
Once INpower® is active and within two minutes of activation (INpower® enters sleep mode
after two minutes of inactivity), push the "PAIR" button on your Bluetooth® Smart device at
the "GENERAL SETTINGS" screen. The "PAIR" button is usually located in the SETTINGS menu:
Settings\General Settings Pair and sincro Pair other devices
Wait until you see the "SENSOR ID" in the screen's device and select it. Wait until it is paired.
48 Pairing
®
\
®
Sensor ID: 12345
\
®