Leuze electronic BCL 31 Manual De Usuario página 18

EN
CAUTION
PROFIBUS:
If parameters are changed that can also be set via the PROFIBUS, they are over-
written with the parameter setting defined in PROFIBUS after PROFIBUS start-
up. If device or module parameters are to be changed permanently, they must be
set in the PROFIBUS project.
Combined use of module 18 and module 19 can result in malfunction. For this
reason, use only one of the two modules at one time.
Decommissioning, maintenance
CAUTION
 Never open the device yourself! If you do, there is a danger that laser radiation
will be emitted from the device in an uncontrollable way. The housing of the
BCL 3x does not contain any parts that need to be adjusted or serviced by
the user. If faults cannot be remedied, the device must be decommissioned
and it must be ensured that the device is not accidentally recommissioned.
 Package the device for transport and storage in such a way that is protected
against shock and humidity. The original packaging offers optimum protec-
tion. Ensure compliance with the approved environmental conditions listed in
the specifications.
 Do not use aggressive cleaning agents such as thinner or acetone for clean-
ing the device.
18